Description
4MM Half-Out Deep Six to 8-32 Titanium Insert
Easton’s 4MM Half-Out Titanium Insert enables the use of common 8-32 thread broadheads in 4MM Full Metal Jacket and 4MM Carbon Injexion shafts. Precision machined from TI-6 series titanium, this half-out delivers high strength-to-weight ratio.
Easton’s HIT Epoxy is recommended for installation.
4MM FMJ Chart
| Size | Shaft Weight (GPI) | Spine @ 28" Span (Deflection in inches) | Stock Length (Inches) | Deep Six Field Point 100 Grains (optional) | 8-32 Field Point (Inches) | O.D. (Inches) | 4MM Halfout (size) | 4mm Nock Collar (size) |
|---|---|---|---|---|---|---|---|---|
| 400 | 9.8 | 0.400 | 31.5 | DP6-5 | 5/16 | 0.234 | #2 | #5 |
| 340 | 11.0 | 0.340 | 32 | DP6-5 | 5/16 | 0.240 | #3 | #6 |
| 300 | 11.7 | 0.300 | *32.5 | DP6-6 | 5/16 | 0.244 | #4 | #7 |
| 250 | 12.3 | 0.250 | *33 | DP6-6 | 5/16 | 0.247 | #5 | #8 |
4MM Axis Chart
| Size | Shaft Weight (GPI) | Spine @ 28" Span (deflection in inches) | Stock Length (inches) | Deep 6 Field Point 100 Grains (optional) | 8-32 Field Point (inches) | O.D. (inches) | 4MM Halfout (size) | 4mm Nock Collar (size) |
|---|---|---|---|---|---|---|---|---|
| 250* | 9.8 | 0.250 | *33" | DP6-6 | 5/16 | 0.244 | #4 | #7 |
| 300* | 9.3 | 0.300 | *32.5" | DP6-6 | 5/16 | 0.241 | #3 | #6 |
| 340 | 8.3 | 0.340 | 32" | DP6-4 | 5/16 | 0.234 | #2 | #5 |
| 400 | 7.6 | 0.400 | 31.5" | DP6-4 | 5/16 | 0.229 | #1 | #4 |
Half-Out Titanium Insert Specifications:
- 55 grains
- Package contains (6) six inserts
- Exposed length is 0.94″
- Shank length is 1.20″
- Made in the USA
Reviews
There are no reviews yet.