Description
4MM Half-Out Deep Six to 8-32 Titanium Insert
Easton’s 4MM Half-Out Titanium Insert enables the use of common 8-32 thread broadheads in 4MM Full Metal Jacket and 4MM Carbon Injexion shafts. Precision machined from TI-6 series titanium, this half-out delivers high strength-to-weight ratio.
Easton’s HIT Epoxy is recommended for installation.
4MM FMJ Chart
Size | Shaft Weight GPI | Spine @ 28" Span Deflection in inches | Stock Length Inches | Deep Six Field Point 100 Grains (optional) | O.D. Inches | 4MM Halfout |
---|---|---|---|---|---|---|
400 | 9.8 | 0.400 | 31.5 | DP6-5 | 0.234 | #2 |
340 | 11.0 | 0.340 | 32 | DP6-5 | 0.240 | #3 |
300 | 11.7 | 0.300 | 32.5 | DP6-6 | 0.244 | #4 |
250 | 12.3 | 0.250 | 33 | DP6-6 | 0.247 | #5 |
4MM Axis Chart
Size | Shaft Weight GPI | Spine @ 28" Span (deflection in inches) | Stock Length (inches) | Deep 6 Field Point 100 Grains (optional) | O.D. Inches | 4MM Halfout |
---|---|---|---|---|---|---|
400 | 7.6 | 0.400 | 31.5" | DP6-4 | 0.229 | #1 |
340 | 8.3 | 0.340 | 32" | DP6-4 | 0.234 | #2 |
300 | 9.3 | 0.300 | 32.5" | DP6-6 | 0.241 | #3 |
250 | 9.8 | 0.250 | 33" | DP6-6 | 0.244 | #4 |
Half-Out Titanium Insert Specifications:
- 55 grains
- Package contains (6) six inserts
- Exposed length is 0.94″
- Shank length is 1.20″
- Made in the USA
Reviews
There are no reviews yet.